ENTHONE M-9-N INK WITH CATALYST 20/A BI-PAKS
Enthone M-9-N with Catalyst 20/A is a White permanent, two component, epoxy-based marking ink.
When properly applied and air cured, M-Series inks have excellent adhesion to glass, metal and thermosetting
plastics. They have excellent chemical and thermal resistance properties. M-Series marking inks are
used in the electronic, aerospace, automotive, appliance and decorative packaging industries. Uses include
the permanent marking of semiconductor components, printed circuit boards, connectors,
dials, nameplates, panels, chassis, glass and thermoplastics.
Meets: CID A-A-56032D Types I, II & III
Certified to MIL-I-43553 and AA56032.
Characteristics: Superior adhesion to epoxy, glass, metal or other nonporous surfaces designed for rubber stamping or offset printing. Excellent resistance to abrasion, MEK, alcohol, TCE, flux removers, salt, acid and alkali solutions when properly cured. When used with a rubber stamp, use a brayer roller or similar device to roll the ink into a thin draw-down before transferring to the stamp.
The General Services Administration has authorized the use of this commercial item description (CID) as a replacement for MIL-I-43553B and MIS-37271 by all federal agencies.
1. SCOPE. This commercial item description covers a catalyzed epoxy system of marking inks for metallic or other non-porous surfaces and printed wiring boards.
2. CLASSIFICATION.
2.1 Type. The marking ink and color shall be of the following types and colors, as specified:
Type I – General usage
Type II – Non-conductive ink (e.g., printed wiring boards)
Type III – Outside exposure.