Total Light / Medium-Duty Floor Cleaning Chemistry
Total is an aluminum safe, high pH, multipurpose exterior and floor cleaner engineered to attack grease,
grime, soil or any other unwanted contaminants associated with floor cleaning. Total is a non-hazardous,
environmentally safe green product.
- Biodegradeable and environmentally green.
- Contains NO harmful glycol ethers, phosphates, HAP’s, or VOC’s.
- Will not attack shop floor sealants.
- Super concentrated formula for low volume usage and low cost.
Total is an aluminum safe, high pH, multipurpose degreaser and detergent engineered to attack grease,
grime, soil or any other unwanted contaminants associated with cleaning. Total is a medium duty, super
concentrated, non-butyl formula capable of cleaning and degreasing everything from hard-surface concrete
shop floors & walls, to industrial equipment, to company vehicles. Total is safe to use anywhere water is
- Biodegradeable And Environmentally Green
- Contains NO Harmful Glycol Ethers, Phosphates, HAP’s, Or VOC’s
- Will Not Attack Paint or Rubber Seals
- Multi-Metal Safe / Use Anywhere Water is Tolerable
- Super Concentrated Formula For Low Volume Usage And Low Cost
Total is safe for use with all standard cleaning equipment.
Total is a concentrated industrial cleaner. Dilute with water to achieve specified strength concentrations.
Concentration and Application Methods
Use Total at a use concentration of 3%–20% by volume depending on the nature, make-up and extent of
the soils to be removed. The use of HOT water increases performance. Apply to the surface to be cleaned
with the desired application method. Follow with a thorough water rinse.
Shop Floors & Other Hard Surface
MOP & BUCKET: For shop floor cleaning, add 10%–20% by volume of Total to a mop bucket filled with
HOT clean water. Apply to the surface to be cleaned with mop or brush. Where soil deposits are heavy, let
soak for 5 to 15 minutes and brush if possible. Follow with additional mopping or a thorough hose or highpressure water rinse. For additional soil removal, wet-vacuum dry cleaned area.
AUTOMATIC FLOOR SCRUBBERS: For shop floor & hard surface cleaning, add 10%–20% by volume
of Total to the already water filled solution tank. Adding Total to the tank after filling with water will diminish foam production. Hot water temperatures for most plastic-tanked scrubbers should not exceed 140º F.
Where soil deposits are heavy, a double pass may be necessary. Rinse with clean water.
SPONGE, BRUSH & BUCKET: For typical vehicle, truck or fleet washing, add 5%-10% by volume of Total
to a water-filled bucket at a temperature between 40º–160º F. Apply to surface to be cleaned with sponge or
brush. Where soil deposits are heavy, let soak for 5–15 minutes and brush if possible. Follow with a thorough hose or high-pressure water rinse.
LOW OR HIGH PRESSURE SPRAYERS: Apply Total at a rate of 4–12 fl .ounces/gallon (ratios of 1:32–
1:10). Apply to surface to be cleaned. Where soil deposits are heavy, let soak for 5–15 minutes and brush if
possible. Follow with a thorough hose or high-pressure water rinse.
FOAM GENERATORS: Total will create high quality foam through typical low & high pressure foam generators. Apply to surface to be cleaned. Allow foam to soak and cling to soils. Where soil deposits are heavy, let soak for 5–15 minutes and brush if possible. Follow with a thorough hose or high-pressure water rinse.
Chemical set-up and operation of equipment should be done in accordance with the equipment manufacturer’s instructions.
Safety and Handling
Read and understand this products MSDS before handling.
Individual users should verify the nature of spent solutions to assure compliance with local, state, and federal regulations. Contact Seacole for specific details and/or further waste treatment recommendations.
Total is available in 1 gallon bottles, 5 gallon pails, 55 gallon drums, and 275 gallon totes. Tank wagons
available upon request.