Cabinet and lid shall be constructed of 12 gauge steel, finished with a powder coat paint for long life and easy cleaning. Parts basket to be constructed of 12 gauge steel and can easily be removed from cabinet. Steel chip tray located below parts basket to prevent small parts from falling into the tank. Lid will have interlocking mechanical seal, with safety shut-off and lid lock mechanism. Lid shall have gas struts for minimal effort in opening and closing lid. Machine will have automatic oil skimmer to remove excess oils from sump tank, thus lengthening the effectiveness of wash solution. Machine will have accommodations to allow for the following options:

• Automatic Water Fill
• Service Tray
• Temperature Gauge
• Detail Brush with Pump
• Power Brush (Pneumatic)
• Hour Meter
• Caster Wheels
• Pressure Gauge

Rotating spray arm must be water driven. Rotation of arm will provide complete spray coverage of parts being washed. Twenty-three (23) spray nozzles will belocated on the rotating spray arm providing over lapping coverage of parts being washed.

Electrical control panel shall have 7 day programmable heater timer, 60 minute wash timer, power indicating light and low water shutdown indicator lights. Machine will include a sealed safety stop switch. An adjustable thermostat will control water temperature. A safety control switch will not allow pump or heater to operate if water level drops below a prescribed set point.