At only 32 inches wide, the Cuda 2216 Series parts washer is our most compact
top-loading parts washer. The Cuda 2216 Series has a 500-lb. load capacity, and
a 22-inch turntable diameter. The Cuda 2216 Series has a 1 HP pump motor
producing 28 GPM @ 30 PSI.

Image result for PDF BUTTON

Click Here To Request Quotation
 
  • Cabinet

    Cabinet: 14 ga., Tank: 12 ga., Door: 14 ga. steel, finished with an industrial acrylic urethane paint finish for long life and easy cleaning. Turntable to be constructed of 7 ga. Steel with sealed ball bearings. Pull out debris screen located below parts basket to prevent small parts from falling into the tank. Lid will have safety shut-off and door latch mechanism. All welded seams must meet ASME Standards. Machine will have accommodations to allow for the following options:

    • Automatic Water Fill
    • 7 Day Heater Timer
    • 7 Day Oil Skimmer Timer
    • Detail Brush
    • Power Brush
    • Small Parts Basket
    • Containment Ring
    • Stainless Steel Upgrade
  • Rotating Turntable

    Rotating turntable must be gear-motor and chain driven. Rotation of turntable will provide complete spray coverage of parts being washed. Seven (7) spray nozzles will be located on the spray manifold providing over lapping coverage of parts being washed.

  • Oil Skimmer

    An oil skimmer will be provided that removes floating oils from the surface of the sump tank cleaning solution. The skimmer will be constructed with a fan cooled electric motor, stainless steel disk skimmer and dual stainless steel scraper blades.

  • Controls

    Electrical control panel shall have 12 hour heater timer, 60 minute wash timer, 30 minute skimmer timer, turntable on-off switch and low water shutdown indicator light. An adjustable thermostat will control water temperature. A safety control switch will not allow pump or heater to operate if water level drops below a prescribed set point.

  • Pump

    Pump will be a centrifugal, 1 HP, with 28 GPM (106 lpm) output at 30 PSI (2.1 bar) capable of handling 190°F (88°C) water with cleaning detergents. Pump motor must have safety overload protection.

  • Heater

    Machine to have 2kW (120V), 4.5kW (230V/1Ph) 6 KW (all 3Ph) immersion heating elements. Heating element is to be constructed with an incoloy sheath for maximum corrosion and oxidation protection.

  • Dimensions
    • Overall dimensions 34″W x 50″H x 44″D (86 x 127 x 112 cm)
    • Turntable diameter 22″ Diameter (55.9 cm)
    • Working height 16″ (40.6 cm)
    • Work load 500 lbs. (227 kg)
    • Ship weight 446 lbs. (202 kg)
    • Water tank capacity 25 gallons (95 liters)
  • Options
    • Automatic Water Fill
    • 7 Day Heater Timer
    • 7 Day Oil Skimmer Timer
    • Detail Brush
    • Power Brush
    • Small Parts Basket
    • Containment Ring
    • Stainless Steel Upgrade

 

 

CUDA PARTS WASHER MODELS

Click Pictures For Model Information

 

CUDA SJ-15 PARTS WASHER

CUDA 2216 PARTS WASHER

CUDA 2412 PARTS WASHER

 

CUDA 2518 PARTS WASHER

 


CUDA 2530 PARTS WASHER

CUDA 2840 PARTS WASHER

CUDA 2848 PARTS WASHER

CUDA 4860 PARTS WASHER