Enthone M-Series Permanent Epoxy Marking Ink

 

M-Series inks are permanent, two component, epoxy-based marking inks. They may be used with a selection of catalysts which cure at elevated and/or room temperatures. When properly applied and cured, M-Series inks have excellent adhesion to glass,  metal and  thermosetting plastics. They have  excellent  chemical  and  thermal resistance properties. READ ENTIRE TECHNICAL DATA SHEET BEFORE USING THIS PRODUCT.

M-Series marking inks are used in the electronic, aerospace, automotive, appliance and decorative packaging industries. Uses include the permanent marking of semiconductor components, printed circuit boards, connectors, dials, nameplates, panels, chassis, glass and thermoplastics.

Click here for M-Series PDF


 

Enthone 50-Series Cat-L-Ink

 

50-Series Cat-L-Inks are permanent, two component, epoxy-based screen printing inks. They may be used with a  selection of catalysts which cure at elevated and/or room temperatures. When properly applied and cured, Cat-LInks have excellent adhesion to photoimageable, thermal and UV solder masks, glass, metal and plastic. They have excellent chemical and thermal resistance properties.

50-Series Cat-L-Inks are used in the electronic, aerospace, automotive, appliance and decorative container  industries. Uses include the permanent marking of circuit boards, semiconductor components, connectors, dials,  nameplates, edge-lit panels, chassis, glass and thermoplastics.

Click here for 50-Series PDF


 

Enthone 60-Series Two Component Legend Ink

 

60 – Series is a permanent, two component, epoxy-based, thermal cure, screen printing ink. It is  designed to print legend on printed wiring boards over bare copper, base laminate or any solder mask coating. 60  – Series has a minimum mixed pot life of two (2) weeks at ambient temperature.

ENTHONE 60 – Series cures to a semi-matte finish. It provides superior performance – meets or exceeds  Bellcore Legend Ink requirements, passes several IPC-SM-840B, Class 3 solder mask requirements and meets  most of the requirements of Commercial Item Description A-A56032A. 60 – Series has unsurpassed adhesion to  all solder masks or base epoxy laminates and demonstrates adhesion pull-strength values exceeding most  photoimageable solder masks.

ENTHONE 60 – Series will withstand multiple soldering operations with no degradation in color. It may be applied  to either side of the circuit board before hot air solder leveling. 60 – Series yellow may also be used for laser  marking bar codes that can be easily read by bar code scanners.

Click here for 60-Series PDF